The Team Utilization tab displays utilization
information for the selected team and its members.
On the Ethernet Devices tab, select a
team.
Click Properties.
Select the Team
Utilization tab.
Team Utilization options are read only and
include:
TOE
Connections. For the team and each adapter in the team,
the number of TCP Offload Engine connections. When TOE is disabled
on the team, this column will display N/A for the team and each
adapter.
RX Maximum
Speed. For the team, the sum of the current speed of each
adapter in the team that is currently receiving. For example, in an
NFT team, only the speed of the currently active adapter is
considered. For 802.3ad teams, this is the sum of the speeds of the
currently active adapters. The RX Maximum Speed for each adapter is
the connection speed of the link. The RX Maximum Speed for each
adapter that does not have a link is 0. The RX Maximum Speed is
displayed in Mbps or Gbps.
TX Maximum
Speed. For the team, the sum of the current speed of each
adapter in the team that is currently transmitting. For example, in
an NFT team, only the speed of the currently active adapter is
considered. For load balancing teams, this is the sum of the speeds
of the transmitting adapters. The TX Maximum Speed for each adapter
is the connection speed of the link. The TX Maximum Speed is
displayed in Mbps or Gbps.
RX Current
Utilization. For the team and each adapter in the team,
the current receive throughput divided by the maximum theoretical
receive throughput expressed as a percentage. The value is
represented by a progress bar as well as a textual display.
TX Current
Utilization. For the team and each adapter in the team,
the current transmit throughput divided by the maximum theoretical
transmit throughput expressed as a percentage. The value is
represented by a progress bar as well as a textual display.
RX Peak
Utilization. For the team and each adapter in the team,
the maximum RX Current Utilization value reached by the device.
This value is displayed as a percentage.
TX Peak
Utilization. For the team and each adapter in the team,
the maximum TX Current Utilization value reached by the device.
This value is displayed as a percentage.
RX Current
Throughput. For the team and each adapter in the team, the
RX Current Throughput value calculated by dividing the number of
bytes received since the last calculation divided by the time
elapsed since the last calculation.
TX Current
Throughput. For the team and each adapter in the team, the
TX Current Throughput value calculated by dividing the number of
bytes transmitted since the last calculation divided by the time
elapsed since the last calculation.
RX Peak
Throughput. For the team and each adapter in the team, the
highest calculated RX Current Throughput since the Team Properties
page was displayed. The result is displayed as four digits, with
appropriate units (Bps, KBps, MBps, GBps).
TX Peak
Throughput. For the team and each adapter in the team, the
highest calculated TX Current Throughput since the Team Properties
window was displayed. The result is displayed as four digits, with
appropriate units (Bps, KBps, MBps, GBps).
