POST problems flowchart

Symptoms:

• Server does not complete POST

  NOTE: The server has completed POST when the system attempts to access the boot device.

• Server completes POST with errors

Possible problems:

• Improperly seated or faulty internal component
• Faulty KVM device
• Faulty video device

  Item	Refer to
  1	"POST error messages and beep codes"
  2	"Video problems" in the HP ProLiant Servers Troubleshooting Guide located on the Documentation CD or on the HP website
  3	KVM or iLO documentation
  4	"Loose connections"
  5	"Symptom information"
  6	Server maintenance and service guide, located on the Documentation CD or the HP website
  7	"Port 85 and iLO messages" in the HP ProLiant Servers Troubleshooting Guide located on the Documentation CD or on the HP website
  8	"General memory problems are occurring" in the HP ProLiant Servers Troubleshooting Guide located on the Documentation CD or on the HP website
  9	"Hardware problems" in the HP ProLiant Servers Troubleshooting Guide located on the Documentation CD or on the HP website Server maintenance and service guide, located on the Documentation CD or the HP website
  10	"Server information you need" in the HP ProLiant Servers Troubleshooting Guide located on the Documentation CD or on the HP website "Operating system information you need" in the HP ProLiant Servers Troubleshooting Guide located on the Documentation CD or on the HP website