Previous Topic

Next Topic


To remove the component:

  1. Power down the server.
  2. Extend or remove the server from the rack (Extend the server from the rack, Remove the server from the rack).
  3. Remove the access panel.
  4. Remove the air baffle.

    NOTE: The server ships with at least two DIMMs installed in DIMM slots 3B and 4B.

  5. Remove the DIMM.

    Removing a DIMM

    CAUTION: Be sure to install DIMMs in the proper configuration. Refer to the Documentation CD.

    CAUTION: Use only Compaq branded or HP DIMMs. DIMMs from other sources may adversely affect data integrity.

    IMPORTANT: DIMMs do not seat fully if turned the wrong way.

To replace a DIMM, align the DIMM with the slot and insert the DIMM firmly. When fully seated, the DIMM slot latches lock into place.