Extend the server from the rack

1. Pull down the quick release levers on each side of the server to release the server from the rack.

   

2. Extend the server on the rack rails until the server rail-release latches engage.

   WARNING: To reduce the risk of personal injury or equipment damage, be sure that the rack is adequately stabilized before extending a component from the rack.

   WARNING: To reduce the risk of personal injury, be careful when pressing the server rail-release latches and sliding the server into the rack. The sliding rails could pinch your fingers.

3. After performing the installation or maintenance procedure, slide the server back into the rack:
   1. Press the server rail-release latches and slide the server fully into rack.

      

   2. Press the server firmly into the rack to secure it in place.