Windows Embedded CE enables you to draw lines and a variety of filled shapes. A line is a set of highlighted pixels on a raster display or a set of dots on a printed page identified by two points, a starting point and an ending point. In Windows Embedded CE, the pixel located at the starting point is always included in the line, and the pixel located at the ending point is always excluded.

The default current position for any device context is located at the point (0,0) in logical coordinates. You can set these coordinates to a new position by calling the MoveToExfunction and passing a new set of coordinates.

You can draw a single line by calling the LineTofunction. This function draws a line from the current position up to, but not including, a specified ending point. You can draw a series of connected line segments by calling the Polylinefunction and supplying an array of points that specify the ending point of each line segment.

Filled shapes are geometric shapes that Windows Embedded CE outlines with the current pen and fills with the current brush. Windows Embedded CE supports four filled shapes: ellipse, polygon, rectangle, and round rectangle, which is a rectangle with rounded corners.

A Windows Embedded CE–based application uses filled shapes in a variety of ways. Spreadsheet applications, for example, use filled shapes to construct charts and graphs; drawing applications enable users to draw figures and illustrations using filled shapes.

An ellipse is a closed curve defined by two fixed points — f1and f2— such that the sum of the distances — d1+ d2— from any point on the curve to the two fixed points is constant. You can draw an ellipse by using the Ellipsefunction. When calling Ellipse, supply the coordinates of the upper-left and lower-right corners of the ellipse bounding  rectangle. A bounding rectangle is the smallest rectangle that completely surrounds the ellipse.

A polygon is a filled shape with straight sides. Windows Embedded CE uses the currently selected pen to draw the sides of the polygon and the current brush to fill it. Windows Embedded CE fills all enclosed regions within the polygon with the current brush.

Note:
Windows Embedded CE does not support multiple fill modes. When it fills a polygon, it fills all subareas created by intersecting lines within the polygon.

A rectangle is a four-sided polygon whose opposing sides are parallel and equal in length and whose interior angles are 90 degrees. Although you can call the Polygonfunction to draw a rectangle if you supply it with all four sides, it is easier to call the Rectanglefunction. This function requires only the coordinates of the upper-left and the lower-right corners.

You can call the RoundRectfunction to draw a rectangle with rounded corners. Supply this function with the coordinates of the lower-left and upper-right corners of the rectangle and the width and height of the ellipse used to round each corner.

You can call the FillRectfunction to paint the interior of a rectangle. You can call the FillRgnfunction to fill a region using the specified brush.

Because Windows Embedded CE does not support paths, many line-drawing functions available on Windows-based desktop systems are not available in Windows Embedded CE. Windows Embedded CE does not support functions to draw an arc, beizer curve, chord, pie, polypolygon, or polypolyline. However, you can approximate these shapes using existing Windows Embedded CE drawing functions. For example, you can create an arc by calling the Ellipsefunction with an appropriately defined clipping region.

Note:
The Ellipseand RoundRectfunctions require significant GDI computation. To increase your application performance, use these functions sparingly.

The following code example shows how to create shapes and lines using the Rectangle, Ellipse, Polygon, and RoundRectfunctions.

Note:
To make the following code example easier to read, error checking is not included. Do not use this code example in a release configuration unless you have modified it to include secure error handling.

Copy Code

VOID DrawRandomObjects (HWND hwnd) { HDC hDC; // Handle to the display device context RECT rect; // A RECT structure that contains the // window's client area coordinates POINT pt[4]; // Four dimensional POINT structure array HBRUSH hBrush, // Handle to the new brush object hOldBrush; // Handle to the old brush object TCHAR szDebug[80]; // A debug message string int x1, y1, x2, y2, x3, y3, x4, y4, // The coordinates of four points iRed, iGreen, iBlue, // Indicate the Red, Green, Blue component // color of the brush iObject; // An integer indicates the type of objects // Retrieve the handle to the display device context. if (!(hDC = GetDC (hwnd))) return; // Retrieves the coordinates of a window's client area. GetClientRect (hwnd, &rect); // Avoid divide by zero errors when the window is small. if (rect.right == 0) rect.right++; if (rect.bottom == 0) rect.bottom++; // Generate three random numbers. iRed = rand() % 255; iGreen = rand() % 255; iBlue = rand() % 255; // Create a solid brush object and select it into the device context. hBrush = CreateSolidBrush (RGB(iRed, iGreen, iBlue)); if (hOldBrush = SelectObject (hDC, hBrush)) { // Randomly generates four points. x1 = rand() % rect.right; y1 = rand() % rect.bottom; x2 = rand() % rect.right; y2 = rand() % rect.bottom; x3 = rand() % rect.right; y3 = rand() % rect.bottom; x4 = rand() % rect.right; y4 = rand() % rect.bottom; // Randomly generate an integer to indicate the type of objects. iObject = rand() % 4; switch (iObject) { case 0: wsprintf (szDebug, TEXT("Rectangle(%d ,%d, %d, %d)\n"), x1, y1, x2, y2); // Draws a rectangle. Rectangle (hDC, x1, y1, x2, y2); break; case 1: wsprintf (szDebug, TEXT("Ellipse(%d, %d, %d, %d)\n"), x1, y1, x2, y2); // Draws an ellipse. Ellipse (hDC, x1, y1, x2, y2); break; case 2: wsprintf (szDebug, TEXT("RoundRect (%d, %d, %d, %d, %d, %d)\n"), x1, y1, x2, y2, x3, y3); // Draws a rectangle with rounded corners. RoundRect (hDC, x1, y1, x2, y2, x3, y3); break; case 3: pt[0].x = x1; pt[0].y = y1; pt[1].x = x2; pt[1].y = y2; pt[2].x = x3; pt[2].y = y3; pt[3].x = x4; pt[3].y = y4; wsprintf (szDebug, TEXT("Chord(%d, %d, %d, %d, %d, %d, %d, %d)\n"), x1, y1, x2, y2, x3, y3, x4, y4); // Draws a polygon. Polygon(hDC, pt, 4); break; default: break; } // Select the old brush into the device context. SelectObject (hDC, hOldBrush); // Delete the brush object and free all resources associated with it. DeleteObject (hBrush); } ReleaseDC (hwnd, hDC); return; }

See Also