Installing Central and Remote Sites

Installation overview

The Ipswitch WhatsUp Gold distributed monitoring solution is comprised of the:

The are two installation programs for the distributed monitoring solution, one for the WhatsUp Gold Central Site and a second for the WhatsUp Gold Remote Site. The installation programs step you through the process of installing each part of the distributed solution.

Following are the overview steps required to install the WhatsUp Gold distributed monitoring solution:

  1. Install the Central Site application. For more information, see Step 1: Installing the WhatsUp Gold Central Site.
    • (Recommended) Select whether to enable the WhatsUp Web server and select the Web server port.
    • Create a User Name and Password that the Remote Sites will use when connecting to the Central Site.
    • Configure the TCP port that the Remote Sites will use to connect to the Central Site.

      Remote and Central Installation Step 1

  2. Make sure the firewall ports are specified and open for the inbound connections (from the Remote Sites on Port 9394 TCP). For more information see, Step 2: Configuring the firewall for Central and Remote Site connections.

    Remote and Central Installation Step 2

  3. Install the Remote Site application at the remote locations. For more information, see Step 3: Installing the WhatsUp Gold Remote Site.
    • Select whether to enable the WhatsUp Web server and select the Web server port.
    • Set up the Central Site IP Address and TCP Port that the Remote Site(s) will use to connect to the Central Site.
    • Set the User Name and Password that the Remote Site(s) will use to gain access the Central Site.
    • Set up the Display Name for the Remote Site.
    • (Recommended) Enter the HTTP address that the Central Site will use to access this Remote Site's Web interface.
    • Run the network discovery to identify devices on the network and set up Active and Passive Monitors.

      Remote and Central Installation Step 4

  4. Create Workspace Reports on the Central Site installation for each of the Remote Sites. For more information see, Step 4: Using Reports for WhatsUp Gold Distributed Solution.
  5. (Optional) Set up the Dashboard application on the Central Site. For more information, see Step 5: Using the Ipswitch Dashboard Screen Manager application.

After the above steps are complete, the multi-site network monitoring system is ready to monitor, and be further customized and expanded as required. Data will be communicated from the Remote Sites to the Central Site. The network data is rolled-up in the workspace reports and full reports that you set up (for more information, see Step 4: Using Reports for WhatsUp Gold Distributed Solution). If you enabled access to the Remote Sites, you can drill-down from the Central Site reports to detailed historical data on the related Remote Site.