You can specify default values for many of the fields in the dialog boxes that you fill out when you add computers to a server. This is useful if you are adding many computers with similar characteristics. How to...
Field |
Description |
ID |
The unique identifier of the computer. Cannot be edited after the computer has been added to Symantec LiveState Delivery. Use a minimum of three and a maximum of eight characters with the following limitations. Valid Characters
Invalid
Characters |
Display Name |
The name that is displayed in the Command Center. The name must be unique on this server. |
Host Name |
This name will be displayed as the Computer Name in the Control Panel Network properties dialog box. Use a maximum of 32 alphanumeric characters, including upper and lower case letters, numbers, dashes (-). and underscores (_). |
Hardware Address |
The hardware address (MAC address) of the computer’s NIC. Note: If this is a Cooperative Mode computer with no NIC that is intended to be used solely as a dial-up mobile computer, you can type any 12 digits (for example, 111111111111) in the Hardware address field.
|
IP Address |
The computer's IP address on BOOTP. If you use DHCP, this field is disabled. |
Gateway Address |
The computer’s gateway address on BOOTP. If you use DHCP, the field is disabled. Define the Gateway Address only if the computer is connected to one of a multiple number of subnets. The Configuration Server uses the address to find computers on multiple subnets in a BOOTP environment. It is not necessary to enter a Gateway Address for dial-up mobile computers. |
Cooperative |
Sets the computer type. After the computer is added to Symantec LiveState Delivery, this checkbox cannot be edited. Unchecked – Adds the computer as a Consistent Mode computer. (default) Checked – Adds the computer as a Cooperative Mode computer. |
Network Type |
Either Ethernet or Token Ring. Corresponds to the network card in the computer, if you use BOOTP. If you use DHCP, this field is disabled. |
Repository Folder |
The HOME directory where information about this computer will be stored. After the computer is added to Symantec LiveState Delivery, this field cannot be edited. |
Button |
Action |
Add Row |
Adds an empty row at the bottom of the table. You can add an unlimited number of rows. |
Delete Row |
Deletes the selected row from the table. |
Import from File |
Lets you browse to a file that contains the computer information you want to import. You can import a comma-delimited, tab-delimited, semicolon-delimited, or colon-delimited text file. |
Export to File |
Opens the File Import/Export Settings dialog box where you can select the delimiter setting of the computer identification information and then export the file. More information |