On the Ethernet Devices tab, select an
adapter or team. Click the adapter or team to select or deselect
it. When an adapter or team is selected, it is highlighted.
Click Properties. The tabs displayed will vary
depending on the adapter you selected.
Controls:
Speed/Duplex
Setting. Changes the current speed and duplex settings. Be
sure this setting is compatible with the link partner (examples:
switch, hub).
10000
adapters
Range = Auto/Auto; 1Gbps/Full;
10Gbps/Full
2500 capable
adapters
Range = Auto/Auto; 1Gbps/Full;
2.5Gbps/Full
1000BASE SX or
LX Adapters
Default = Auto/Auto
Range = Auto/Auto
10/100/1000
Adapters
Default = Auto/Auto
Range = Auto/Auto; 10/Half; 10/Full;
100/Half; 100/Full; 1000/Full (1000/Full enables auto-negotiation
but restricts advertised capabilities to 1000/Full.)
This setting is not supported by the following
driver sets:
HP NC-Series Mellanox 10GbE Driver for
Windows
HP NC-Series Emulex 10GbE Driver for
Windows
Locally
Administered Address. Specifies the user-defined MAC
Address of the adapter, which overrides the burned-in MAC Address.
This box is disabled if the selected adapter has been teamed.
