Smart Array 6i cache module

To remove the component:

1. Power down the server.
2. Extend or remove the server from the rack (Extend the server from the rack, Remove the server from the rack).
3. Remove the access panel.

   CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all AC power cords before removing or installing the PCI riser cage.

4. Remove the PCI riser cage.

   CAUTION: To prevent a server malfunction or damage to the equipment, do not add or remove the battery pack while an array capacity expansion, RAID level migration, or stripe size migration is in progress.

   CAUTION: After the server is powered down, wait 15 seconds and then check the amber LED before unplugging the cable from the cache module. If the amber LED blinks after 15 seconds, do not remove the cable from the cache module. The cache module is backing up data, and data is lost if the cable is detached.

5. Remove the cable from the plastic retainer.

   

6. Remove the Smart Array 6i cache module.
7. Disconnect the cable.

   

To replace the component, reverse the removal procedure.

CAUTION: To prevent damage to the cache module during installation, be sure the cache module is fully inserted before pressing down.