When you install the Remote Agent on the NetWare server, the following occurs:
A directory that is called BKUPEXEC is created in the SYS: volume, and the latest tested versions of the NLMs needed by Backup Exec to process NetWare-specific requests are copied to the BKUPEXEC/NLMS directory.
The BESTART.NCF and BESTOP.NCF files are created and placed in the SYS:SYSTEM directory. These files contain commands to load the appropriate NLMs that allow the NetWare server to be backed up.
The Remote Agent is installed remotely from the Windows media server. If you have previously installed the Remote Agent on NetWare servers, run BESTOP from each NetWare console before you install the Remote Agent on those servers again.
See Installing Backup Exec options to remote computers.
When Backup Exec is installed, the TCP/IP protocol is selected for use by default. However, you can change the default settings through the Options-Network and Security dialog box.
Setting default options for the Remote Agent for NetWare Systems
Installing Backup Exec options to remote computers
Adding BESTART to the Autoexec.ncf file on the NetWare server