Adding and editing package properties

You can set up package properties as values that are defined in the package, or enable them as administration parameters. When the package is assigned to a managed Pocket PC, the Site Administrator can set the appropriate values for each administration parameter via the Symantec LiveState Delivery Command Center.

To add or edit a package property

1.

In the Add New/Edit Admin Parameter window, in the Name box, type the name of the property.

2.

If you want to enable the property as an administration parameter, under Admin parameter, check Enable as administration parameter.

If this option is disabled, the property value will be set in the package and cannot be changed by the Site Administrator when the package is being deployed to a managed Pocket PC. Only the relevant boxes are displayed.

3.

If you have enabled the property as an administration parameter and want to make it optional, check Set as optional parameter.

When the package is being assigned to a managed Pocket PC, the Site Administrator must set values for all required administration parameters, but can skip the optional parameters.

4.

In the Value Type box, click on the drop-down list and select one of the following:

5.

In the Display Type box, click on the drop-down list and select one of the following:

If the Data Type is Boolean, the Display Type is automatically set to Check Box, and you cannot change it.

If the display type is List Box or Combo Box, you need to specify the available options.

6.

In the Value box, type the property value.

If the property is enabled as an administration parameter, this is the default value.

7.

In the Property description box, type a short description of the package property.

8.

If necessary, in the Optional Values in List/Combo Box box, specify the available values for the administration parameter.

For each value that you want to enter, on a new line, type the value then press Enter.

When the package is deployed, the Site Administrator can set the administration parameter by selecting one of the available values from a drop-down list in the Symantec LiveState Delivery Command Center.

9.

Click OK.