Restoring Linux with network boot

Note:

If NetBackup access management is used in your environment, you must provide the appropriate credentials when prompted so that NetBackup can restore the client files.

To network boot Linux clients, BMR requires the following:

During the prepare-to-restore operation all the information is gathered that is required for a Linux network boot. After the prepare to restore, boot the client to start the restore.

To network boot a Linux client

  1. Prepare to restore the client.

  2. Ensure that the client is turned off .

  3. Turn on the client.

  4. PXE Boot the client according to the hardware vendor instructions.

    On some systems, the BIOS displays a message that indicates that you can press a key to force a PXE Boot . On others, you may have to modify the settings in the BIOS to add the network card to the default boot order. Consult your hardware documentation for details.

  5. When you are prompted, either press the Enter key or wait until the system boots.

    The system boots and the restore begins with no further user intervention required.

More Information

Preparing to restore a client