NetBackup status code: 300

Message: vmchange eject verify not responding

Explanation: During the eject process, the vmchange command is called with a "-verify_eject" call until all of the volumes for the request are in the MAP. This command call failed. Or it did not return the proper information to the Vault eject process.

Recommended Action: Do the following, as appropriate:

Review the Vault debug log in the following directory for detailed information about why the process failed:
```
UNIX and Linux: /usr/openv/netbackup/logs/vault
Windows: install_path\NetBackup\logs\vault
```
Also review the summary.log in each of the sidxxx directories that had problems:
```
UNIX and Linux: 
/usr/openv/netbackup/vault/sessions/vault_name/sidxxx
Windows: 
install_path\NetBackup\vault\sessions\vault_name\sidxxx
```
(where xxx is the session ID)

This error often indicates that the media were left in the off-site Vault volume group but physically reside in the robot or the robotic MAP. To solve this problem, do one of the following:
Manually remove any media that are in the off-site Vault volume group but are still in the robot.
Inventory the robot. An inventory puts any media that were in the off-site Vault volume group back into the robotic volume group. Then, rerun the Vault sessions that failed.