If the configuration is incomplete, the wizard shows the following:

• The drives that are not configured for a robot appear under the Standalone Drives node.

• The Robot node has empty nodes under it for each available drive address in the robot.

The configuration process may be incomplete if either of the following are true:

• You have not run the wizard previously and some of the devices do not support serialization completely.

• You did not make any configuration changes when you ran the wizard previously.

Use this screen to do the following:

• Verify the device relationships. Examine the tree diagram to ensure that the drives are subordinate to the robots that own them and in the correct order.

• Fix the device relationships. If a device relationship is not correct, you can drag a drive and drop it on the robot in which it resides.

  See Completing the device configuration.

• Enable or disable the use of individual robots or drives.To enable a disable a device, click the check box; to disable a device, clear the check box.

• Obtain information about a device.

  See Obtaining information about a device.