Allow search and capture of existing items

Specifies whether, when you set the criteria for a new search, you can choose to include previously-captured items in the search results. By default, you have the option to do so.

Buffer Since Last Run

When you select a schedule to use when you define the criteria for a new search, you can select Since last run in the Date range section. This option instructs Compliance Accelerator to search new items that have arrived since you last ran this scheduled search. In the Start box, you enter the date to be taken as a starting point for the first run of the search.

By default, Since last run searches from the date of the last run (or the Start date for the first search) to the current day minus 1 (that is, up to yesterday). If required, you can change this interval to search to the current day minus n days. To use Since last run with any searches that run more than once a day, set the interval to 0.

Combine subject and content fields with OR

When you search for words in both the subject of an item and its content, specifies whether to find only those items that meet one or both criteria. By default, Compliance Accelerator finds only those items that meet both criteria.

Disable Search against Other Departments

Specifies whether, when you define the criteria for a new search, the Other Depts option in the Author & Recipients area is available. By default, Compliance Accelerator does let you conduct searches against other departments.

Enable Search Threads

Specifies whether to enable or disable all search facilities. By default, Compliance Accelerator enables these facilities.

Error search if index is rebuilding or failed

Specifies whether the search of a particular archive returns an error if its index is offline, rebuilding, or failed. By default, Compliance Accelerator returns an error in these circumstances.

Error search if missing items or content

Specifies whether the search of a particular archive returns an error if its index has failed to index either an indexable archived item or the content of the item. The default setting is false (not enabled).

Error search if index requires width normalization

Specifies whether the search of a particular archive returns an error if its index must be rebuilt to handle full-width characters correctly. The default setting is Off.

Fail search of archive if archive has been copied or moved

Specifies whether to mark as failed a search of a moved or copied archive, if the destination archive is not included in the search. The default is False, which means that Compliance Accelerator produces a warning when searching such archives, but it does not mark them as failed.

Guaranteed Sample search timeout (mins)

Specifies the number of minutes for which guaranteed sample searches run before Compliance Accelerator automatically accepts them and uses the results for sampling. The default is 240 minutes.

Hotword Set Tag

Specifies the tag with which Compliance Accelerator prefixes hotword sets when you enter them in the criteria for a new search. The default is HWS.

Hotword Tag

Specifies the tag with which Compliance Accelerator prefixes hotwords when you enter them in the criteria for a new search. The default is HW.

Ignore non journal archives for Guaranteed Sample searches

Specifies whether to search non-Journal archives when conducting guaranteed sample searches. By default, Compliance Accelerator searches Journal archives only, as these archives are the only type to which the Journaling Connector writes.

Maximum number of searches listed in filters

For areas of Compliance Accelerator that list searches from which you can choose, specifies the maximum number of searches to include in the list. The default is 250.

Maximum Search Retries

Specifies the number of times that Compliance Accelerator tries to search an archive before giving up. Enter a value in the range 1 through 50, where the default is 5.

Number of acceptance search Threads

Specifies the number of threads that are assigned to accepting search result sets. For example, the default setting of 5 means that no more than five search results sets are accepted at a time. Enter a value in the range 1 through 10.

Number of delete search Threads

Specifies the number of threads that are assigned to deleting search result sets. For example, the default setting of 2 means that no more than two search results sets are deleted at a time. Enter a value in the range 1 through 10.

Number of sampling search Threads

Specifies the number of threads that are assigned to sampling search result sets. For example, the default setting of 5 means that no more than five search results sets are sampled at a time. Enter a value in the range 1 through 10.

Number of Vault search Threads

Specifies the number of threads that are assigned to searching archives per index server. For example, the default setting of 10 means that no more than 10 archives are searched per Enterprise Vault server at a time. Enter a value in the range 1 through 10.

Only allow 'Research this message' on the first selected message

Specifies whether, when you click multiple items in the Review pane and then click Search, Compliance Accelerator lets you specify the search criteria for each of the selected items or only for the first of the selected items.

Optimize search based on oldest and youngest items

When set to True, improves performance by excluding from a search those archives that Compliance Accelerator has determined do not contain any items in the date range that you have specified in your search criteria. The default setting is False, which means that Compliance Accelerator searches all the available archives, regardless of whether their contents fall within your specified date range or not.

Use this setting with "Synchronize thread checking period (sec)", which is one of the Vault Directory Synchronization configuration options. If you set "Optimize search based on oldest and youngest items" to true, you must lower the setting for "Synchronize thread checking period (sec)" to ensure that Compliance Accelerator does not run searches against out-of-date data. For example, you can lower the setting to 3600 seconds (1 hour).

Require 'Author' / 'Content' / 'From Date' / 'Recipients' / 'Subject' / 'To Date' to be specified

Specifies whether it is mandatory to enter the designated criteria before you can perform a search. By default, these criteria are optional. You may want to make them mandatory to prevent searches from returning an overwhelming number of results.

Retry time when index service is busy (min)

Specifies the frequency in minutes with which Compliance Accelerator tries to access an Enterprise Vault Indexing service that is too busy to perform a search. Enter a value in the range 1 through 300, where the default is 5.

Retry time when index service not running (min)

Specifies the frequency in minutes with which Compliance Accelerator tries to access an Enterprise Vault Indexing service that is unavailable. Enter a value in the range 1 through 300, where the default is 5.

Return only top messages in search results

Specifies whether searches return the top-level items only. Setting this option to Off means that all files attached to the top-level items are displayed in search results.

Save SMTP subject rather than filename

For items that were archived using File System Archiving (FSA), specifies whether to show the SMTP message subject rather than the FSA file name in the Review pane.

Search result page refresh time

Specifies the frequency in seconds with which Compliance Accelerator refreshes the results summary page during a running search. Enter a value in the range 1 through 300, where the default is 10.

Searches page refresh time

Specifies the frequency in seconds with which Compliance Accelerator refreshes the Searches pane for a department. Enter a value in the range 1 through 300, where the default is 20.

Show Application Search Tree 'Constrain Tree Height' option

When you define the criteria for a new search, specifies whether a Constrain tree height option is available in the Authors & Recipients area. When checked, this option fixes the height of the department tree view in the Authors & Recipients area. By default, Compliance Accelerator hides the option.

Show Application Search Tree 'Expand All' option

When you define the criteria for a new search, specifies whether an Expand All link is available in the Authors & Recipients area. Clicking this link expands all the departments in the tree view. By default, Compliance Accelerator hides the link.

Show 'Guaranteed Sample' option for new searches

Specifies whether you can create Guaranteed Sample searches. By default, you can.

Show Search Result In Progress

Specifies whether users can access the Review pane while a search is in progress, so that they can immediately start to review the items that Compliance Accelerator has found. By default, Compliance Accelerator permits this.

Total number of search results worker threads

Specifies the maximum number of search results worker threads that are allowed to run on the system. These threads handle the processing of search results returned from the archive. The maximum value is 5, and the default is 2.

Total number of search threads

Specifies the maximum number of search threads that are allowed to run on the system across all index volumes. The maximum value is 500, and the default is 100.

Use sequence number for searches

Optimizes performance for searches that return more than 50,000 results. By default, this option is enabled.

When service starts, wait before synchronizing Index Services (minutes)

Specifies the number of minutes that Compliance Accelerator waits at startup before synchronizing with available index services. Enter a value in the range 0 through 300, where the default is 0.

When service starts, wait before starting Vault Searches (minutes)

Specifies the number of minutes that Compliance Accelerator waits at startup before searching the archives for items. Enter a value in the range 0 through 300, where the default is 0.