iSCSI IP settings window

IPv4
Address: IPv4 address (dotted decimal) for the iSCSI device.
Subnet
Mask: Network subnet mask (dotted decimal) for the iSCSI device.
Default
Gateway: Default route for the iSCSI device.

The iSCSI IP Settings window allows you to specify how an IP address is obtained for an iSCSI device.

iSCSI IP Settings window

Controls:

Configure IPv4 Address: Selects an IPv4 configuration for the iSCSI device
- Obtain an IPv4 Address Automatically. Uses DHCP to acquire an IPv4 configuration for the iSCSI device.
- Use the following IPv4 Address. Use the specified IPv4 configuration for the iSCSI device. The IPv4 address must be different from IPv4 addresses that are assigned to other iSCSI devices and Ethernet adapters.
  - IPv4 Address: IPv4 address (dotted decimal) for the iSCSI device.
  - Subnet Mask: Network subnet mask (dotted decimal) for the iSCSI device.
  - Default Gateway: Default route for the iSCSI device.
Configure IPv6 Address: Selects an IPv6 configuration for the iSCSI device. This feature is currently only supported on NC382x and NC532x adapters.
- Obtain an IPv6 Address Automatically. Uses DHCP to acquire an IPv6 configuration for the iSCSI device.
- Process Router Advertisements. Select this option to allow the iSCSI IPv6 auto configuration to generate a routable IPv6 IP address.
OK. Closes tab and returns you to the Settings tab.
Cancel. Closes tab and returns you to the Settings tab.