Previous Topic

Next Topic

iLO 3 settings

The iLO 3 settings commands enable you to view or modify iLO 3 settings. iLO 3 settings are located at /map1/config1.

Targets

No targets

Properties

Property

Access

Description

oemhp_enable

Read/Write

Enables or disables the iLO 3. Boolean values are accepted.

oemhp_timeout

Read/Write

Sets session timeout in minutes. Valid values are 15, 30, 60, and 120.

oemhp_passthrough

Read/Write

Enables or disables Terminal Services Passthrough. Boolean values are accepted.

oemhp_rbsuenable

Read/Write

Enables or disables RBSU prompt during POST. Boolean values are accepted.

oemhp_rbsulogin

Read/Write

Enables or disables login requirement for accessing RBSU. Boolean values are accepted.

oemhp_rbsushowip

Read/Write

Enables or disables iLO 3 IP address display during POST. Boolean values are accepted.

oemhp_rcconfig

Read/Write

Sets the Remote Console configuration. Valid values are enabled, disabled, or automatic.

oemhp_telnetenable

Read/Write

Enables or disables telnet.

oemhp_httpport

Read/Write

Sets the HTTP port value.

oemhp_sslport

Read/Write

Sets the SSL port value.

oemhp_rcport

Read/Write

Sets remote console port value.

oemhp_vmport

Read/Write

Sets virtual media port value.

oemhp_tsport

Read/Write

Sets Terminal Services port value.

oemhp_sshport

Read/Write

Sets the SSH port value.

oemhp_sshstatus

Read/Write

Enables or disables SSH. Boolean values are accepted.

oemhp_serialclistatus

Read/Write

Enables or disables CLP session through serial port. Boolean values are accepted.

oemhp_serialcliauth

Read/Write

Enables or disables authorization requirement for CLP session through serial port. Boolean values are accepted.

oemhp_serialclispeed

Read/Write

Sets the serial port speed for the CLP session. The valid values are 9600, 19200, 38400, 57600, and 115200.

oemhp_minpwdlen

Read/Write

Sets the minimum password length requirement.

oemhp_authfailurelogging

Read/Write

Sets the logging criteria for failed authentications.

oemhp_rc_aquire (not supported in iLO 3 v1.00)

Read/Write

Enables or disables remote console acquire operations.

oemhp_high_perf_mouse

Read/Write

Enables or disables high performance mouse.

oemhp_computer_lock

Read/Write

Enables or disables the Remote Console Computer Lock.

oemhp_enforce_aes

Read/Write

Enable or disable enforcing AES/3DES encryption

Examples

set /map1/config1 oemhp_enable=yes oemhp_timeout=30

You can specify one or more properties in the command line. If multiple properties are given on the same command line, they must be separated by a space.

oemhp_computer_lock command examples:

set /map1/config1 oemhp_computer_lock = windows

set /map1/config1 oemhp_computer_lock = custom,l_gui,l

set /map1/config1 oemhp_computer_lock = disabled

For a complete list of oemhp_computer_lock custom keys, see the HP Integrated Lights-Out 2 User Guide. Any keys with a space must have the space replaced with an underscore. For example:

set /map1/config1 oemhp_computer_lock = custom,SYS_RQ

set /map1/config1 oemhp_computer_lock = custom,SYS_RQ


Объявления: