Integrated Management Log tab

The IML contains system errors discovered during POST and by the System Management driver during normal operations. IML entries are dated and have severity levels and error counts that can be used to help isolate a problem. The Integrated Management Log on the Log tab displays the current entries in the IML.

Each IML entry displays the following information about a failed device:

• One of the following severity levels:
  • Information indiciates general information about a system event.
  • Repaired indicates this entry has been repaired.
  • Caution indicates a non-fatal error condition has occurred.
  • Critical/Failed indicates a device failure.
• Class
• Last Update
• Initial Update
• Count
• Description

From this tab, the following actions are available:

• To change a device's severity level to "Repaired," click the Set Selected Items to "Repaired" button.
• To select all IML entries, click the Check All button.
• To unselect any selected IML entries, click the Uncheck All button.
• To enter any text or note into the IML, click the Add Maintenance Note button.
• To remove all IML entries, click the Clear IML button. HP recommends saving the current contents in a file before clearing the log.
• To save the Diagnose log to an HTML file onto a storage device such as a USB disk or diskette, click the Save button. This operation does not affect the current contents of the IML, but it does archive IML data for use when working with HP to diagnose issues.