The progress and status of offline quick,
complete, or custom testing appears on the Status tab as
follows:
Device displays the specific device being
tested.
Test
displays the specific test running.
Status displays the test results as
follows:
Canceled: The test did not complete or
was canceled.
Passed: The test passed, and the device
is operating within specifications.
Failed: The device failed the test, or
the test itself failed. A failure indicates that additional testing
should be performed on the device.
Further
Troubleshooting Required: A communication problem exists
that could be related to the health of the device. Perform
additional troubleshooting procedures to determine the problem or
use the Custom test option on the Test tab to retest the
device.
Abnormal
termination: The test terminated abnormally.
Test
Progress displays the progress of the testing.
Time
displays the time elapsed for the specific test.
To cancel the test in progress, click the
Cancel button.
To repeat the testing, click the Retest button.
To view all test failure information, view the
Error Log on the Log tab.
