Automatic configuration

Some steps of the setup process are automatically configured, and therefore, these configuration screens do not appear. For information about changing any preconfigured information, see the operating system online help. Automatically configured parameters that might require later changes include:

• Licensing mode—By default, the server licensing mode is set to per- device or per- user with a five device or user count. For information about licensing, see the online help or the operating system documentation.
• Administrator password—The administrator password is created during the initial setup. For procedures to change the administrator password after the installation is complete, see "Changing the administrator password."
• Dynamic disk upgrade—The operating system is preinstalled on an approximately 40 GB partition. On an array controller, the logical drive size is set to the maximum size of the drive. The logical drive of array controllers contains 3 to 7 MB of available space to support a dynamic disk upgrade.

  NOTE: The dynamic disk upgrade is optional. For information about dynamic disk upgrades, refer to the operating system documentation. After upgrading to dynamic disk, the emergency repair disk must be updated.