...The following SCSI
drive(s) need Automatic Data Recovery: SCSI Port Y: SCSI
ID Z
Select F1 to continue
with recovery of data to drive. Select F2 to continue without
recovery of data to drive.
Audible
Beeps: None
Possible
Cause: A failed or replacement drive has not yet
been rebuilt.
Action:
Perform one of the following actions:
Press the F1 key to continue with recovery of data
to the drive. Data will be automatically restored to drive
X when a failed drive has been replaced,
or to the original drive if it is working again without
errors.
Press the F2 key to continue without recovery of
data to the drive. The failed drive will not be rebuilt and the
system will continue to operate in a failed state of Interim Data
Recovery Mode.
Replace the failed drive and press the
F1 key to rebuild the
array. If the drive rebuild is not successful or is aborted because
the system rebooted before the rebuild of the drive completed,
another version of the 1786 POST error message will be displayed.
Refer to the following message.
