IPAutoconfigurationMask

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters

Data type Range Default value
REG_DWORD Subnet mask, in dotted decimal format 255.255.0.0

Description

Stores the subnet mask assigned to the client by the IP autoconfiguration feature.

Autoconfiguration allows TCP/IP to configure an interface even when it cannot locate a DHCP server. If an attempt to locate a DCHP server fails, TCP/IP configures the interface by using an IP address from the Microsoft reserved Class B network (169.254.0.0), subnet mask 255.255.0.0. During autoconfiguration, TCP/IP continues its attempts to locate a DHCP server and abandons the autoconfiguration process if one is located.

IPAutoconfigurationMask also appears in the Interfaces\<interface-name> subkeys. The value of the entry in the Tcpip\Parameters subkey applies, by default, to all interfaces. However, if this entry appears in any Interfaces\<interface-name> subkey, its value overrides the value in the Tcpip\Parameters subkey when configuring that interface.

Note Image Note

This entry is used only when IP autoconfiguration is enabled, that is, the value of IPAutoconfigurationEnabled is 1.

Caution Image Caution

Do not change the value of this entry. If you do, the IP address assigned to the interface might not be reliable.

Related Entries

Page Image

500 Internal Server Error

Internal Server Error

The server encountered an internal error or misconfiguration and was unable to complete your request.

Please contact the server administrator at webmaster@systemmanager.forsenergy.ru to inform them of the time this error occurred, and the actions you performed just before this error.

More information about this error may be available in the server error log.

Additionally, a 500 Internal Server Error error was encountered while trying to use an ErrorDocument to handle the request.