NoteHKLM\SYSTEM\CurrentControlSet\Services\RemoteAccess\Parameters
| Data type | Range | Default value |
|---|---|---|
| REG_DWORD | 0 - 7 | 1 |
Specifies the functions of the remote access router. To enable more than one function, sum the value for each function.
For example, to enable a router for RAS clients (value = 1) and for inter-LAN communication (value = 2), set the value of RouterType to 3.
| Value | Meaning |
|---|---|
| 1 | A remote access server for RAS clients. |
| 2 | A LAN-to-LAN router. |
| 4 | A LAN-to-WAN-to-LAN or Demand Dial router. |
To change the value of this entry, use Routing and Remote Access Manager. Right-click the name of the RAS server, click Properties, and click the General tab. Do not edit the registry.
You must stop and restart the Remote Access service before changes to these values take effect.
Note
This value appears in the registry when you use the Routing and Remote Access Manager snap-in to configure the router.