Data Recovery over Network

Top  Previous  Next

Generally, data restoring over network is very much the same as that on a local computer.

R-Studio Agent should be running on the network computer where data are to be recovered.

Read the Connecting over the Internet topic to learn how to establish connection between R-Studio and R-Studio Agent over the Internet.

To connect to a remote computer

1 Click the Connect to Remote button or select Connect To Remote on the Drive menu and select Connect to the remote computer

A list of nearby computers will appear in the Computer List on the Connect to Remote Computer dialog box.

Click to enlarge
Connect to Remote Computer dialog box
2 Select a computer from the list on the Connect to Remote Computer dialog box and enter the password

Otherwise, you need to specify in the Computer: field the name or IP address of the remote computer where data are to be recovered. The Port should coincide with the port specified for the R-Studio Agent.

The Password: field is for the password of R-Studio Agent running on the remote computer.

Note: If the remote computer is started with R-Studio Agent Emergency, leave this field blank.

> R-Studio will connect to the remote computer and show its hard drive and logical disk structure of the remote computer below the device/disk structure of your local computer

It can be processed the same way as that on a local computer.

Click to enlarge
Recover dialog box

When the Recover dialog box appears, you may select whether you want to save recovered files on the local or remote computer. Saving recovered files on a remote computer may be useful when the remote computer has a healthy disk because you do not have to transfer files over network. It may be an external USB hard drive, for example.

When R-Studio connects to the remote computer, it check if R-Studio Agent is present and its password. If there is no R-Studio Agent installed, R-Studio may try to remotely install it. See the R-Studio Agent topic for details.