Interface Details

This General Workspace report displays SNMP information reported by a specific interface. To gather this data, you must have the SNMP Credentials configured for the device in it's Device Properties.

Device Information

The top section of the Workspace report shows the current state of the device, as well as the display name and device type. Click the device name to go to that device's Device Status report.

Interface Information

The lower section of the Workspace report is the information reported by SNMP:

• Interface name. The name and IP address of the interface. Click the interface name to access the Interface Utilization report for this interface.
• Type. The type code of the interface as defined in the MIB file for the interface.
• Index. The SNMP index of the interface.
• Description. Usually the interface or port name on the device.

Polling Information

• Status. The current status of the device as reported through SNMP. Click the status code to access the Router/Switch/Interface view of the Device Status report.
  • 1 - up
  • 2 - down
  • 3 - testing
  • 4 - unknown
  • 5 - dormant
  • 6 - notPresent
  • 7 - lowerLayerDown
• Last poll time. The date and time of the last successful poll.
• Last poll time interval. The time (in seconds) between the last two successful polls.

Received octets

• Rx speed. The maximum bandwidth (in Mbps) that the interface allows for received octets..
• Last rx octets. The bandwidth (in Kbps) used by the interface during the last polling period for received octets.
• Rx octets total. The total number of octets received (in KB) during the last polling cycle.
• Rx utilization. The percent of the total bandwidth used by the interface for received octets during the last polling cycle.

Transmitted octets

• Tx speed. The maximum bandwidth (in Mbps) that the interface allows for transmitted octets.
• Last tx octets. The bandwidth (in Kbps) used by the interface during the last polling period for transmitted octets.
• Tx octets total. The total number of octets transmitted (in KB) during the last polling cycle.
• Tx utilization. The percent of the total bandwidth used by the interface for transmitted octets during the last polling cycle.

Configuration

Use the Configure Interface Details page to select an interface on a specific device. You can also change the title of the Workspace report by entering a new name in the Report name box.

Related Topics Device - Performance: Interface Utilization Threshold: Interface Utilization Top 10: Interface Utilization Workspace Overview Workspace Report Overview Performance: Interface Utilization (Last X hours/days - Specific Interface)