Collect the following
information for each robot. Although the following information is
not required to configure a robot for Vault, it may help you plan
your configuration so that you use resources efficiently.
The robot properties are
as follows:
ACSLS Server
The name of the ACSLS server. StorageTek only.
ACS Number
The corresponding ACS number for this robot. You can obtain this
information by using the Media Manager tpconfig or by using the ACSLS console commands
such as query acs all or query lsm all. StorageTek only.
LSM Number
The corresponding LSM number for this robot. You can obtain this
information by using the Media Manager tpconfig command or by using the ACSLS console
commands such as query acs all or
query lsm all. StorageTek only.
MAP Capacity
The capacity of the media access port (also known as cartridge
access port). On StorageTek systems, you can obtain this
information by using the ACSLS command query
cap all from the ACSLS console.
MAP Numbers
The identifiers for the media access port. On StorageTek
systems, you can obtain this information by using the ACSLS command
query cap all from the ACSLS
console.