Restoring Windows with media boot

Note:

If NetBackup access management is used in your environment, you must provide the appropriate credentials when prompted so that NetBackup can restore the client files.

To media boot a Windows client, do the following.

To media boot a Windows client

Prepare to restore the client.
Create a bootable CD or bootable DVD from the SRT used during the Prepare to Restore.
Insert the bootable CD or bootable DVD into the CD-ROM drive.

On some systems, you may have to modify the BIOS settings so that the system boots from the CD-ROM drive. Consult your hardware documentation for details.
Turn off the client, then turn it on.

The following message appears:
```
press any key to boot from CD
```
The system boot and the restore begins with no further intervention required.