For best results when installing and
configuring the NetWare client, do the following:
Ensure all minimum system requirements are
met. For information about these requirements, see Minimum system requirements.
Ensure that name resolution is properly
working. You may want to have your NetWare server ping by name your
NetBackup master and media servers, and have your NetBackup master
and media servers ping by name your NetWare server. If you are not
using DNS, ensure your systems' hosts files contain the correct IP
address and names of the servers they will be communicating with
(see Adding information to the
hosts file).
Create a target for each resource you want
to protect using the NetWare Client. The targets must be created on
the NetWare server through the Target Configuration menu before
either scheduled backups can be created from the server or
user-directed backups can be launched from the NetWare server. For
information about creating targets, see Defining targets to back up.
Ensure you have Read and File Scan rights
for whatever you want to back up.
For best results when backing up using the
nontarget method, do the following:
Ensure you have provided scheduled access
rights to all resources that will be backed up using scheduled
backups launched from the NetBackup Administration Console (see
Allowing scheduled
access).
Ensure you have Read and File Scan rights
for whatever you want to back up.
For best results when restoring using the
target method, do the following:
Ensure the information that appears at the
top of the Restore Backups screen is correct. (see Using the restore backups
menu).
Ensure you have Create and Write rights to
the volume to which you are restoring.
For best results when restoring using the
nontarget method, do the following:
Ensure the Class Type
is NetWare for the client to which you are
restoring (see Clients
property sheet) and that the Policy Type
for the source client is NetWare (refer to
your NetBackup documentation on specifying NetBackup
machines).
Ensure the Allow server
directed restores is selected in order for restores to be
launched from the NetBackup administration console (see Setting general configuration
options).