|
|
<volmgr_dir_path>vmchange [-h EMM_server | volume_database_host] -vg_res -rt robot_type -rn robot_number -rh robot_control_host -v volume_group
<volmgr_dir_path>vmchange [-h EMM_server | volume_database_host] -res -m media_id -mt media_type -rt robot_type -rn robot_number -rh robot_control_host -v volume_group -rc1 rob_slot
<volmgr_dir_path>vmchange [-h EMM_server | volume_database_host] -barcode barcode -m media_id [-rt robot_type]
<volmgr_dir_path>vmchange [-h EMM_server | volume_database_host] -m media_id -vltcid vault_container_id
<volmgr_dir_path>vmchange [-h EMM_server | volume_database_host] -barcode barcode -vltcid vault_container_id
<volmgr_dir_path>vmchange [-h EMM_server | volume_database_host] -new_rt robot_type -m media_id -rn robot_number
<volmgr_dir_path>vmchange [-h EMM_server | volume_database_host] -new_v volume_group [-m media_id |{-b barcode -mt media_type -rt robot_type}]
<volmgr_dir_path>vmchange [-h EMM_server | volume_database_host] -vltsession vault_session_id -m media_id
<volmgr_dir_path>vmchange -api_eject -map map_id:mapid:...:mapid | any -w [-h EMM_server | volume_database_host] -res -ml media_id:media_id: ...:media_id -rt robot_type -rn robot_number -rh robot_control_host [-v volume_group]
<volmgr_dir_path>vmchange -multi_eject -w [-h EMM_server | volume_database_host] -res -ml media_id:media_id: ...:media_id -rt robot_type -verbose -rn robot_number -rh robot_control_host
<volmgr_dir_path>vmchange -multi_inject -w [-h EMM_server | volume_database_host] -res -rt robot_type -verbose -rn robot_number -rh robot_control_host
Change volume information in the Enterprise Media Manager database.
Any authorized user can run this command.
For more information about NetBackup authorization, refer to the NetBackup Security and Encryption Guide.
This option is only applicable for NetBackup Enterprise Server.
The name of the Enterprise Media Manager database host that contains information about volumes. If no host is specified, the configured EMM server is used by default. For communicating with pre-6.0 systems not in the EMM domain, this server is the EMM server.
Specifies the robot type of the robot where the volume is located.
Valid robot types for NetBackup Enterprise Server follow:
none, acs, tl4, tl8, tld, tlh, tlm
Unique, logical identification number for the robot where the volume is located.
Name of the host that controls the robot, where the volume is located.
A volume group is a logical grouping that identifies a set of volumes that reside at the same physical location.
Specifies the media type of the volume to change.
Valid media types for NetBackup Enterprise Server follow:
4mm, 8mm, 8mm2, 8mm3, dlt, dlt2, dlt3, dtf, hcart, hcart2, hcart3, qcart, 4mm_clean, 8mm_clean, 8mm2_clean, 8mm3_clean, dlt_clean, dlt2_clean, dlt3_clean, dtf_clean, hcart_clean, hcart2_clean, hcart3_clean
Valid media types for NetBackup Server follow:
4mm, 8mm, dlt, hcart, qcart, 4mm_clean, 8mm_clean, dlt_clean, hcart_clean
Robot coordinate 1 is the robot slot number where the volume is located.
The following applies only to NetBackup Enterprise Server:
Do not enter slot information for API robot types. The robot software tracks the slot locations for these robots.
Expiration date for this volume.
The required date and
time values format in NetBackup commands varies according to your
locale. The /user/openv/msg/.conf
file (UNIX and Linux) and the install_path\VERITAS\msg\LC.CONF file
(Windows) contain information such as the date-time formats for
each supported locale. The files contain specific instructions on
how to add or modify the list of supported locales and formats.
See the "Specifying the locale of the NetBackup installation" topic in the NetBackup Administrator's Guide, Volume II for more information.
Media description for the volume. The double quote marks are required if the description contains any spaces.
Index of the volume pool that contains this volume. You can get the pool index using vmpool -listall.
Maximum number of mounts that are allowed for this volume. Only used for non-cleaning media.
For non-cleaning media, num_mounts is the number of times this volume has been mounted.
For cleaning media, cleanings_left is the number of cleanings that remain for this cleaning tape.
Specifies the media type of the volume to change. See the -mt option for a list of media types.
Specifies the robot type. See the -rt option for a list of robot types.
A volume group is a logical grouping that identifies a set of volumes that reside at the same physical location.
Changes the container in which a volume is stored. vault_container_id (a string of up to 29 alphanumeric characters) specifies the new container for the volume. Use the -m or -barcode option to specify the volume.
Specifies the name of the logical vault that is configured for the robot that ejected the volume.
Specifies the date the volume was sent off site.
The format of date depends on the user's locale setting. For the C locale, the date syntax is as follows:
Specifies the date the volume was requested for return from the vault vendor. For catalog backup volumes, this date is the date that the volume is requested for return from the vault vendor.
The required date and
time values format in NetBackup commands varies according to your
locale. The /user/openv/msg/.conf
file (UNIX and Linux) and the install_path\VERITAS\msg\LC.CONF file
(Windows) contain information such as the date-time formats for
each supported locale. The files contain specific instructions on
how to add or modify the list of supported locales and formats.
See the "Specifying the locale of the NetBackup installation" topic in the NetBackup Administrator's Guide, Volume II for more information.
Specifies the vault vendor's slot number for the slot that this volume occupies.
Specifies the ID of the vault session that ejected this media.
Eject ACS, TLH, or TLM volumes from the specified robot. For ACS and TLM robots, the ejection timeout period is one week. For TLH robots, the robot allows an unlimited period to remove media.
For ACS robots, this option can specify multiple media access ports (MAPs) to use for eject operations. The map_id (also known as the CAP ID) can be all or ALL, which specifies all MAPs in the robot. Or it can be a colon-separated list of MAP IDs in the format of ACS,LSM,CAP. When the -map option is used, media are ejected to the MAPs that are specified by using a nearest MAP algorithm. The algorithm assumes that the LSMs are connected in a line. If your LSMs connect in a configuration other than a line, see the NetBackup Administrator's Guide: Adjacent LSM Specification for ACS Robots and Media Access Port Default for ACS Robots.
For TLM robots, use map_id "ANY" to eject to the MAP that is configured for each media type on the DAS/SDLC server.
For TLH robots, select the "standard" MAP or the "BULK" MAP, depending on the library's hardware configuration.
Wait flag. This flag must be used with the eject, multiple eject, and multiple inject commands.
Uses the robotic library's media access port to eject multiple volumes. This option is valid only for TL8 and TLD robot types. The ejection timeout period is 30 minutes.
Uses the robotic library's media access port to inject multiple volumes. This option is valid only for TL8 and TLD robot types. The user must run the vmupdate command after this operation to update the EMM database.
Retrieves information about a robotic library. This option is valid only for TLD and TL8 robot types
Some robotic libraries implement different functionality for their media access ports. For example, some libraries have the front-panel inject and the eject features that conflict with NetBackup's use of the media access port. (For example, Spectra Logic Bullfrog.) Other libraries require front-panel interaction when you use the media access port (for example, Spectra Logic Gator).
The media is returned to (injected into) the robot in the following situation: you use an eject option and the media is not removed and a timeout condition occurs. If this action occurs, inventory the robot and then eject the media that was returned to the robot.
Make sure that you read the operator manual for your robotic library to gain an understanding of its media access port functionality. Libraries such as those that are noted may not be fully compatible with NetBackup's inject and eject features if not properly handled. Other libraries may not be compatible at all. In addition, NetBackup performs limited validation of these option parameters.
The following command changes the expiration date of volume AJS100:
# vmchange -exp 12/31/99 23:59:59 -m AJS100
The following command changes the pool (which contains volume AJS999) to pool 1 (the NetBackup pool):
# vmchange -p 1 -m AJS999
The following command ejects volumes abc123 and abc124 from ACS robot number 700. The residences for these two volumes are changed to stand alone.
# vmchange -res -api_eject -w -ml abc123:abc124 -rt acs -rn 700 -rh verbena -map 0,0,0
The following command changes the container ID of volume ABC123:
# vmchange -vltcid Container001 -m ABC123