|
|
Explanation: The backup and restore manager (bpbrm) did not read the list of files to back up or restore.
Recommended Action: Verify that the server software was installed correctly on all NetBackup servers. If that is not the problem, do the following:
On a UNIX or Linux NetBackup server, add the VERBOSE option to the bp.conf file. On a Windows NetBackup server, set the option on the Logging tab in the Master Server Properties dialog box.
To display this dialog box, refer to the following topic:
See "Using the Host Properties window" in the Troubleshooting Guide.
Increase the unified logging levels by using the vxlogcfg command as explained in the following procedure:
See "Configuring and using unified logging" in the Troubleshooting Guide.
Retry the operation and check the resulting debug logs for detailed troubleshooting information.