Setting the DNS Configuration

You can set the DNS configuration.

Note: If you are applying any DNS settings to a Windows 9x or Me computer or image, the computer or image must have DNS enabled in order for the settings to take effect.

To specify DNS configuration information

1.

In the Properties for <Configuration set name> window, in the left pane, click DNS Configuration.

2.

If the configuration is for Windows 9x, Me, or NT4 computers, check Apply DNS Host Name.

3.

In the adjacent box, type the host name. If you are setting up a configuration template, you must include at least one asterisk (*) wildcard character.

4.

Check Apply DNS Domain, then type the domain name.

5.

Check Apply DNS Server Addresses.

6.

If you need to add a new address, click Add.

7.

In the DNS Server IP Address dialog box, type the address.

8.

Click OK.

The new address is added to the list.

9.

If you want to change any address on the list, select it, then click Edit, and make the appropriate changes.

10.

If you want to remove an address from the list, select it, then click Delete.

11.

If necessary, rearrange the list by clicking Move Up or Move Down to move the selected address by one place.