When your GhostCast session includes restoring an
image file to client computers, you can set the server to start the
session automatically. The start time can be based on a single
parameter or a combination of parameters.
If you specify more than one Auto Start parameter,
the session starts when one of the conditions is fulfilled.
|
1.
|
|
In the GhostCast Server window, click More Options.
|
|
2.
|
|
Do one or more of the following:
|
- To use the time parameter, type a specified time using a
24-hour clock and within the next 24-hour time period.
For example, 5:30 AM would be
05:30, and 5:30 PM would be 17:30.
- To use the number of clients parameter, type the number of
clients that are connected to the session.
For example, if the threshold
is set to 10, then the server waits and accepts clients until the
tenth client. Once the tenth and final client is accepted, the
server stops accepting clients and starts sending out to the
connected client computers.
- To use the timeout parameter, type a number of minutes after
the last client joined.
For example, if the timeout is
set to 15, the server waits indefinitely until the first client is
accepted. After the first client joins, the 15 minute countdown
starts. If no more clients join, the session starts 15 minutes
later. If another client joins before the 15 minutes timeout, the
timeout counter resets to 15 minutes and starts counting down
again.
