Configuring the monitoring parameters

You can configure the following:

To configure the monitoring parameters

  1. Select Configuration on the Operations Manager menu bar.

  2. Select the Monitoring Parameters tab on the Operations Manager Configuration page.

  3. To enable or disable monitoring by the Enterprise Vault Monitoring agents, select or clear the Monitoring Enabled check box.

  4. To change the monitoring frequency, select a new value from the Monitoring Frequency list.

  5. To change the retention time for the monitoring data, select a new value from the Retain Records For list.

  6. Do one of the following:

    • To save your changes, click Save. It may take a few seconds for the save to take effect.

    • To return to the values as set when you selected the Monitoring Parameters tab (or last clicked Save), click Reset, and then click Save.