Configuring warning and critical status thresholds

You can set the threshold values for the warning and critical status indicators that appear on the Enterprise Vault Monitoring, Exchange Server Monitoring, and Domino Server Monitoring pages.

To configure the performance counter status thresholds

  1. Select Configuration on the Operations Manager menu bar.

  2. Select the Performance Counters tab on the Configuration page.

  3. To change a displayed threshold value, overtype the current value with the required value. Values must be numeric and greater than zero. Critical values must exceed Warning values, except for Available Mbytes and % Free Space, where the Critical value must be less than the Warning value.

  4. Repeat step 3 with the threshold values of other counters, if required.

  5. Do one of the following:

    • To save your changes, click Save. It may take a few seconds for the save to take effect.

    • To return to the values as set when you selected the Performance Counters tab (or last clicked Save), click Reset, and then click Save.

To configure the Exchange or Domino journal mailbox archiving status thresholds

  1. Select Configuration on the Operations Manager menu bar.

  2. Select the Exchange Parameters tab or Domino Parameters tab on the Configuration page, as required.

  3. To change a displayed threshold value, overtype the current value with the required value. Values must be numeric and greater than zero. Critical values must exceed Warning values.

  4. Repeat step 3 for additional values, if required.

  5. Do one of the following:

    • To save your changes, click Save. It may take a few seconds for the save to take effect.

    • To return to the values as set when you selected the Exchange Parameters tab (or last clicked Save), click Reset, and then click Save.

To reset thresholds to their factory settings

  1. Select Configuration on the Operations Manager menu bar.

  2. Select the Performance Counters tab, Exchange Parameters tab, or Domino Parameters tab on the Configuration page, as required.

  3. Click Reset to factory.

  4. Click Save.