SNMP settings

SNMP settings commands enable you to view and modify SNMP settings. SNMP settings are available at /map1/snmp1.

Targets

None

Properties

Property	Access	Description
`accessinfo1`	Read/Write	Sets the first SNMP trap destination address.
`accessinfo2`	Read/Write	Sets the second SNMP trap destination address.
`accessinfo3`	Read/Write	Sets the third SNMP trap destination address.
`oemhp_iloalert`	Read/Write	Enables or disables iLO 3 SNMP alerts. Boolean values accepted.
`oemhp_agentalert`	Read/Write	Enables or disables host agent SNMP alerts. Boolean values accepted.
`oemhp_snmppassthru`	Read/Write	Enables or disables iLO 3 SNMP pass-through. Boolean values accepted.
`oemhp_imagenturl`	Read/Write	Sets the Insight Manager Agent URL.
`oemhp_imdatalevel`	Read/Write	Determines if the LOM device responds to anonymous XML queries. Valid selections can be enabled and disabled.

Examples

set /map1/snmp1 accessinfo1=192.168.0.50 oemhp_imdatalevel=Enabled

You can specify one or more properties on the command line. If there are multiple properties on the same command line, they must be separated by a space.