When the discovery process
is complete, the Select Items to be Installed screen appears. The
Select Items to be Installed screen displays information about
which components are available for installation on your system and
enables you to select or deselect components to install.
The Select Items to be Installed screen
includes the following sections:
Product—Lists the system on which the
selected items are installed.
Status—Indicates if the installation is
Optional Actions—Indicates whether the
component configuration is optional or required but has already
Reboot section—Enables you to specify reboot
settings and determine when reboots occur.
Component selection pane—Enables you to
specify which components to install.
When updating installation for some but not all
NIC components, select the devices to be updated in the window that
appears. If the NIC firmware listed for the device does not have a
version, you cannot add that firmware to the device using HP Smart
When multiple hardware devices such as hard
drives or array controllers exist in a single server, HP Smart
Update Manager lists each device only once. If the devices have
different firmware versions, then the versions are listed from
earliest to latest in a range. When multiple instances of the
firmware are available for installation, the instances are listed
from latest to earliest. If necessary, all hardware device firmware
is flashed to the selected version.
The Select Items to be Installed screen also
includes the following buttons:
Select All—Selects all available components
Deselect All—Clears all components selected
Default—Restores the selections in the
product installation pane to the default view, which is based on
the existing configuration of the local system.
Exit—Exits HP Smart Update Manager.
Install—Installs all selected
Add Supplemental—Enables you to deploy
additional components from a removable device. The additional
components must be located on the root of the device. This button
is available only for offline deployments.
The component selection pane in the Select
Items to be Installed screen is divided into sections, which might
vary depending on your system. These sections include the following
Deselected By User—You have deselected the
components in this section, and the components are not installed.
Installation Not Needed—The components in
this section do not need to be updated, but can be. To update the
components, select the components, and then click Installation Options.
Excluded by Filtering—The components in this
section were excluded through your filtering options. You can use
the Select Bundle Filter option or one of the command line
arguments, /romonly or
/softwareonly, to change
the exclusion on a single target. For multiple targets, this must
be repeated on each additional target. The Select Bundle Filter
option screen is only available when there are bundles such as
ProLiant Support Packs included in the location where the
components to be downloaded are.
Updates to be Installed—The components in
this section can be installed on your system.
Optional Updates—The components in this
section are not selected for installation by default, even if the
product is not already installed or is installed but not
up-to-date. To include the component in the installation set, you
must select the component.
No Device Driver Installed—The devices
supported by the components in this section are detected on the
system, but HP Smart Update Manager requires a device driver before
the component can be made available for installation. Install the
Multi-session installation appears on the
Source Selections screen under certain combinations of dependencies
between the components selected for installation.
Component B depends on the product in
component A, in a way that requires the product to be already
installed and active for component B to install.
Component A needs a reboot after
installation to become active.
There is not an already-installed version of
the product in component A, or at least not one of the correct
version to satisfy the dependency.
If all of the above conditions are true, then
HP Smart Update Manager detects it and a notification to reboot
appears in order to continue the installation. All installable
components appear in the original update list, but only the
components shown before the notification is installed. You must
reboot to complete the installation and then restart HP Smart
Update Manager to continue the installation process.