The progress and status of the Diagnose process
appears on the Status tab when Diagnose completes.
The progress bar shows the test progress.
During tests of longer duration, the Status screen refresh rate
varies.
To cancel the test in progress, click the
Cancel button.
To repeat the test, click the Retest button.
The Device Diagnosis sections display
device-specific details and test results and details for each
device.
Test results are indicated as
follows:
Canceled: The test did not complete or
was canceled.
Passed: The test passed and the device is
operating within specifications.
Failed: The device failed the test, or
the test itself failed. A failure indicates that additional testing
should be performed on the device.
Further
Troubleshooting Required: A communication problem exists
that could be related to the health of the device. Perform
additional troubleshooting procedures to determine the problem or
use the Custom test option on the Test tab to retest the device.
Custom testing can only be performed with HP Insight Diagnostics
Offline Edition.
Abnormal
termination: The test terminated abnormally.
Click the Identify Drive button to identify the
specific hard drive in the computer that may contain the volume.
The hard drive LED indicates the location of the volume as
follows:
A SCSI hard drive containing the logical
volume flashes the hard drive LED.
A SATA or SAS hard drive containing the
logical volume illuminates a blue hard drive LED.