Selecting components to install

When the discovery process is complete, the Select Items to be Installed screen appears.

The Select Items to be Installed screen includes the following sections:

• Product—Lists the system on which the selected items are installed.
• Status—Indicates if the installation is ready.
• Reboot section—Enables you to specify reboot settings and determine when reboots occur.
• Component selection pane—Enables you to specify which components to install.

When updating installation for some but not all NIC components, select the devices to be updated in the window that appears. If the NIC firmware listed for the device does not have a version, you cannot add that firmware to the device using HP Smart Update Manager.

When multiple hardware devices such as hard drives or array controllers exist in a single server, HP Smart Update Manager lists each device only once. If the devices have different firmware versions, then the versions are listed from earliest to latest in a range. When multiple instances of the firmware are available for installation, the instances are listed from latest to earliest. If necessary, all hardware device firmware is flashed to the selected version.

The Select Items to be Installed screen also includes the following buttons:

• Select All—Selects all available components for installation.
• Deselect All—Deselects all components selected for installation.
• Default—Restores the selections in the product installation pane to the default view, which is based on the existing configuration of the local system.
• Exit—Exits HP Smart Update Manager.
• Install—Installs all selected components.
• Add Supplemental—Enables you to deploy additional components from a removable device. The additional components must be located on the root of the device. This button is available only for offline deployments.

  NOTE: HP Smart Update Manager does not support supplemental update for self-discovered components. If you need to add additional components to the Firmware CD, the Firmware CD must be migrated to a USB key and the new components added to the \compaq\swpackages directory. For information on how to create the USB key version of the Firmware CD, see HP USB key utility.

The component selection pane in the Select Items to be Installed screen is divided into sections, which might vary depending on your system. These sections include the following headings:

• Deselected By User—You have deselected the components in this section, and the components are not installed.

  

• Installation Not Needed—The components in this section do not need to be updated, but can be. To update the components, select the components, and then click Installation Options.

  

• Excluded by Filtering—The components in this section were excluded through your filtering options. You can use the Select Bundle Filter option to change the exclusion on a single target. For multiple targets, this must be repeated on each additional target.

  

• Updates to be Installed—The components in this section can be installed on your system.

  

• Optional Updates—The components in this section are not selected for installation by default, even if the product is not already installed or is installed but not up-to-date. To include the component in the installation set, you must select the component.

  

• No Device Driver Installed—The devices supported by the components in this section are detected on the system, but HP Smart Update Manager requires a device driver before the component can be made available for installation. Install the device driver.