Previous Topic

Next Topic

Manual path flow

NOTE: Manual Path Flow does not apply for servers with an integrated ATA RAID IDE Controller.

NOTE: Manual Path Flow is not necessary for servers with Embedded Server Setup.

RBSU can be used to configure an HP server without the use of SmartStart. When the server is powered up in an unconfigured state, RBSU executes when the F9 key is pressed, allowing the server to be configured. After the server has been configured using RBSU:

  1. Restart or power up the server.
  2. Press the F8 key to execute ORCA.
  3. After the primary array controller has been configured with ORCA, restart the server.
  4. Install the operating system. Install any necessary applications as well.

Use the ACU to configure any remaining array controllers.

Manual Path Flow