Previous Topic

Next Topic

Memory Speed with 2 DIMMs per Channel (G6 servers)

This option configures the system to run DIMMs at 1333 MHz when up to two DIMMs are installed on a memory channel, if all other requirements for 1333 MHz operation are met. This provides a performance increase for most workloads. By default, the system will operate at a maximum 1066 MHz when two DIMMs are installed on any memory channel. HP has validated this functionality with all HP DIMMs.

HP recommends that this setting remain at the default of 1066 MHz maximum when using DIMMs not manufactured by HP.

The default setting is 1066 MHz maximum.

Memory Speed with 3 DIMMs per Channel