|
|
|
There are two settings for this option: Enable and Disable. If you do not specify a value for the SSP State, the existing setting remains unchanged.
|
|
NOTE: The SSPState option is valid only for controllers that enable SSP on a controller basis, such as the MSA1000 or the Smart Array Cluster Storage controllers. RA4x00 controllers support SSP that is enabled on a logical drive basis, and use the LogicalDriveSSPState option instead. |
If you enable SSP, you must also specify an adapter for one or more logical drives by using the SSPAdaptersWithAccess option. Otherwise, SSP is automatically disabled.