Known issues

Known issues for Microsoft iSCSI Initiator boot installation

• If you do not select an Adapter Service Name by highlighting it during initial Microsoft Initiator boot setup, the setup continues without an error but does not select an NDIS driver for booting. The deployed system will display a stop error or Blue Screen of Death (BSoD) on boot prior to the first splash screen.
• Multipath I/O (MPIO) is not supported for failover for boot filesystem because MPIO drivers cannot be added during an install phase. MPIO can be used on devices created later.
• The iSCSI host name is derived from the InitiatorName that is set by the HP iSCSI BIOS and should not be used in the GUI.

Known issues for F6 installation

The HP Windows_F6 Diskette 1 must not be inserted in the A:\ drive until after F6 prompts for the diskette. Failure to wait for the prompt will cause the F6 installer to fail reading the second diskette.