Previous Topic

Next Topic

Installing the PCI riser cage

CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all AC power cords before removing or installing the expansion boards.

  1. Align the PCI riser cage with the chassis and slide it into place.

    Aligning a PCI riser cage assembly with the chassis

  2. Tighten the thumbscrews to secure the PCI riser cage:
    1. Lift the thumbscrew knobs.
    2. Turn the thumbscrews clockwise while pressing down, until tightened.
    3. Turn the thumbscrews counterclockwise to lower the thumbscrew knobs.

      Tightening the PCI riser cage thumbscrews