1738-Slot z Drive Array - Storage Enclosure Redundant Cabling Problem Detected

...Check storage box I/O module and cable to restore redundant paths to the following disk drive(s):

Select "F1" to post this message on reboots if problem persists

Select "F2" to disable this message on reboots if problem persists with logical drive(s) corresponding to these disk drives

Audible Beeps: None

Possible Cause: A problem exists with the storage enclosure redundant cabling. A single path was found to drives that were previously connected redundantly.

Action:

Check storage box I/O module and cable to restore redundant paths to the drives, then do one of the following:

• If redundant cables/paths were not purposefully removed, press F1 to display this message on reboot until the problem is resolved. The drives should be accessible through the remaining path.
• If the redundant paths were purposefully removed, press F2 to disable this message on all subsequent reboots.