DIMM handling guidelines
|
|
CAUTION:
Failure to properly handle DIMMs can cause damage to DIMM
components and the system board connector.
|
When handling a DIMM, observe the
following guidelines:
- Avoid electrostatic
discharge.
- Always hold DIMMs by the side edges
only.
- Avoid touching the connectors on the bottom
of the DIMM.
- Never wrap your fingers around a DIMM.
- Avoid touching the components on the sides
of the DIMM.
- Never bend or flex the DIMM.
When installing a DIMM, observe the
following guidelines:
- Before seating the DIMM, align the DIMM with
the slot.
- To align and seat the DIMM, use two fingers
to hold the DIMM along the side edges.
- To seat the DIMM, use two fingers to apply
gentle pressure along the top of the DIMM.
For more information, see the HP website.
