Swapped cables or configuration error detected. A configured array of drives...

...was moved from another controller that supported more drives than this controller supports.

SOLUTION: Upgrade the firmware on this controller. If this doesn't solve the problem, then power down system and move the drives back to the original controller.

Description: You have exceeded the maximum number of drives supported for this controller, and the connected controller was not part of the original array configuration.

Action:

1. Update the controller to the latest firmware version.
2. If the problem persists:

   Replace this controller with the original controller.

   or

   Replace this controller with a new controller that supports the number of drives in the array.