List of messages:

201-Memory Error

203-Memory Address Error

207 - Invalid Memory Configuration Detected. DIMMs installed when no corresponding processor is detected.

207-Invalid Memory Configuration - DIMMs must be installed in pairs or sequentially

207-Invalid Memory Configuration - DIMMs Must be Installed Sequentially

207-Invalid Memory Configuration - DIMM Size Parameters Not Supported.

207-Invalid Memory Configuration - Incomplete Bank Detected in Bank X

207-Invalid Memory Configuration - Insufficient Timings on DIMM

207-Invalid Memory Configuration - Mismatched DIMMs within DIMM Bank

207-Invalid Memory Configuration - Mismatched DIMMs within DIMM Bank...

207-Invalid Memory Configuration - Mismatched DIMMs within DIMM Bank...

207-Invalid Memory Configuration - Unsupported DIMM in Bank x

207-Invalid Memory Configuration - Single channel memory...

207-Invalid Memory Configuration - Unsupported DIMM in Socket X

207-Memory Configuration Warning - DIMM In Socket x does not have Primary Width of 4 and only supports standard ECC

209-Online Spare Memory Configuration - No Valid Banks for Online Spare

209-Online Spare Memory Configuration - Spare Bank is Invalid

209-Hot-add Memory Configuration - Boards must be installed sequentially.

209-Invalid Lockstep memory configuration

209-Mirror Memory Configuration - Memory Sizes on boards X and Y do not match

209-RAID Memory Configuration - Memory Sizes on boards X and Y do not match

210-Memory Board Power Fault on board X

210-Memory Board Failure on board X

212-Processor Failed, Processor X

214-Processor PPM Failed, Module X