Enabling SNMP Trap to receive DLO alert notifications

You can configure an SNMP trap to receive notification messages.

To enable SNMP Trap to receive alert notifications

  1. On the Tools menu, click Recipients.

  2. Click New.

  3. Click SNMP Trap.

  4. Click OK.

  5. Select the appropriate options as follows:


    Type a name for the SNMP Trap recipient.


    Type the name of the SNMP host computer.


    Enter the SNMP port number. The default SNMP port is 162.


    Select this check box to activate the option.

    Notify me a maximum of x times within x minutes

    Type the total number of notifications to be sent to the recipient for all alerts that are generated within the specified number of minutes. After the specified number of notifications have been sent, additional notifications are not sent until the specified minutes have been reached. The maximum number of minutes that can be set is 1440, which is the number of minutes in a day.

    Reset the notification limits after x minutes

    Select this check box to enter the number of minutes that must be reached before the notification limits are reset. When the time limit has been reached, the number of notifications sent is reset to zero.


    Select this check box to activate the option and configure the length of time the recipient is available for notification.


    Enables you to select the days and times when notifications can be sent to the recipient.

    See Scheduling notification for recipients in DLO.

  6. Click OK.

  7. Click Close.